Ambient air is drawn in by the fan and passed over the evaporator. The evaporator cools the air, i.e. it extracts the heat it contains. In the evaporator, the heat removed is transferred to the working fluid (refrigerant). With the aid of an electrically driven compressor, the absorbed heat is “pumped” to a higher temperature level through an increase in pressure and given off to the heating water via the condenser (heat exchanger). In so doing, the electrical energy is used to raise the heat of the environment to a higher temperature level. Due to the fact that the heat energy extracted from the air is transferred to the heating water, this type of appliance is referred to as an air source heat pump. The air source heat pump consists of the following main components: Evaporator, fan and expansion valve as well as the low-noise compressor, the condenser and the electric control unit consisting of branded equipment for controlling and safety devices for protection of Compressor, pump etc. against any variations in voltage, current. Also consists of trip devices, if any parameters not available for smooth running of Heat Pump. The Heat Pump is connected to a Hot Water Storage Tank which is made of 4 mm M.S. Sheet, is insulated with rock wool, for maximum temperature sustenance.. Once the temperature in Tank reaches 55°C the machine automatically shuts down and again re-starts when the temperature reduces to 52°C. There is 24 x 7 uninterrupted Hot Water for the whole year, unconditional to any seasons or weather, unlike solar heaters which are completely dependent on Weather conditions.

Ambient air is drawn in by the fan and passed over the evaporator. The evaporator cools the air, i.e. it extracts the heat it contains. In the evaporator, the heat removed is transferred to the working fluid (refrigerant). With the aid of an electrically driven compressor, the absorbed heat is “pumped” to a higher temperature level through an increase in pressure and given off to the heating water via the condenser (heat exchanger). In so doing, the electrical energy is used to raise the heat of the environment to a higher temperature level. Due to the fact that the heat energy extracted from the air is transferred to the heating water, this type of appliance is referred to as an air source heat pump. The air source heat pump consists of the following main components: Evaporator, fan and expansion valve as well as the low-noise compressor, the condenser and the electric control unit consisting of branded equipment for controlling and safety devices for protection of Compressor, pump etc. against any variations in voltage, current. Also consists of trip devices, if any parameters not available for smooth running of Heat Pump. The Heat Pump is connected to a Hot Water Storage Tank which is made of 4 mm M.S. Sheet, is insulated with rock wool, for maximum temperature sustenance.. Once the temperature in Tank reaches 55°C the machine automatically shuts down and again re-starts when the temperature reduces to 52°C. There is 24 x 7 uninterrupted Hot Water for the whole year, unconditional to any seasons or weather, unlike solar heaters which are completely dependent on Weather conditions.

Ambient air is drawn in by the fan and passed over the evaporator. The evaporator cools the air, i.e. it extracts the heat it contains. In the evaporator, the heat removed is transferred to the working fluid (refrigerant). With the aid of an electrically driven compressor, the absorbed heat is “pumped” to a higher temperature level through an increase in pressure and given off to the heating water via the condenser (heat exchanger). In so doing, the electrical energy is used to raise the heat of the environment to a higher temperature level. Due to the fact that the heat energy extracted from the air is transferred to the heating water, this type of appliance is referred to as an air source heat pump. The air source heat pump consists of the following main components: Evaporator, fan and expansion valve as well as the low-noise compressor, the condenser and the electric control unit consisting of branded equipment for controlling and safety devices for protection of Compressor, pump etc. against any variations in voltage, current. Also consists of trip devices, if any parameters not available for smooth running of Heat Pump. The Heat Pump is connected to a Hot Water Storage Tank which is made of 4 mm M.S. Sheet, is insulated with rock wool, for maximum temperature sustenance.. Once the temperature in Tank reaches 55°C the machine automatically shuts down and again re-starts when the temperature reduces to 52°C. There is 24 x 7 uninterrupted Hot Water for the whole year, unconditional to any seasons or weather, unlike solar heaters which are completely dependent on Weather conditions.

Ambient air is drawn in by the fan and passed over the evaporator. The evaporator cools the air, i.e. it extracts the heat it contains. In the evaporator, the heat removed is transferred to the working fluid (refrigerant). With the aid of an electrically driven compressor, the absorbed heat is “pumped” to a higher temperature level through an increase in pressure and given off to the heating water via the condenser (heat exchanger). In so doing, the electrical energy is used to raise the heat of the environment to a higher temperature level. Due to the fact that the heat energy extracted from the air is transferred to the heating water, this type of appliance is referred to as an air source heat pump. The air source heat pump consists of the following main components: Evaporator, fan and expansion valve as well as the low-noise compressor, the condenser and the electric control unit consisting of branded equipment for controlling and safety devices for protection of Compressor, pump etc. against any variations in voltage, current. Also consists of trip devices, if any parameters not available for smooth running of Heat Pump. The Heat Pump is connected to a Hot Water Storage Tank which is made of 4 mm M.S. Sheet, is insulated with rock wool, for maximum temperature sustenance.. Once the temperature in Tank reaches 55°C the machine automatically shuts down and again re-starts when the temperature reduces to 52°C. There is 24 x 7 uninterrupted Hot Water for the whole year, unconditional to any seasons or weather, unlike solar heaters which are completely dependent on Weather conditions.

Ambient air is drawn in by the fan and passed over the evaporator. The evaporator cools the air, i.e. it extracts the heat it contains. In the evaporator, the heat removed is transferred to the working fluid (refrigerant). With the aid of an electrically driven compressor, the absorbed heat is “pumped” to a higher temperature level through an increase in pressure and given off to the heating water via the condenser (heat exchanger). In so doing, the electrical energy is used to raise the heat of the environment to a higher temperature level. Due to the fact that the heat energy extracted from the air is transferred to the heating water, this type of appliance is referred to as an air source heat pump. The air source heat pump consists of the following main components: Evaporator, fan and expansion valve as well as the low-noise compressor, the condenser and the electric control unit consisting of branded equipment for controlling and safety devices for protection of Compressor, pump etc. against any variations in voltage, current. Also consists of trip devices, if any parameters not available for smooth running of Heat Pump. The Heat Pump is connected to a Hot Water Storage Tank which is made of 4 mm M.S. Sheet, is insulated with rock wool, for maximum temperature sustenance.. Once the temperature in Tank reaches 55°C the machine automatically shuts down and again re-starts when the temperature reduces to 52°C. There is 24 x 7 uninterrupted Hot Water for the whole year, unconditional to any seasons or weather, unlike solar heaters which are completely dependent on Weather conditions.

Ambient air is drawn in by the fan and passed over the evaporator. The evaporator cools the air, i.e. it extracts the heat it contains. In the evaporator, the heat removed is transferred to the working fluid (refrigerant). With the aid of an electrically driven compressor, the absorbed heat is “pumped” to a higher temperature level through an increase in pressure and given off to the heating water via the condenser (heat exchanger). In so doing, the electrical energy is used to raise the heat of the environment to a higher temperature level. Due to the fact that the heat energy extracted from the air is transferred to the heating water, this type of appliance is referred to as an air source heat pump. The air source heat pump consists of the following main components: Evaporator, fan and expansion valve as well as the low-noise compressor, the condenser and the electric control unit consisting of branded equipment for controlling and safety devices for protection of Compressor, pump etc. against any variations in voltage, current. Also consists of trip devices, if any parameters not available for smooth running of Heat Pump. The Heat Pump is connected to a Hot Water Storage Tank which is made of 4 mm M.S. Sheet, is insulated with rock wool, for maximum temperature sustenance.. Once the temperature in Tank reaches 55°C the machine automatically shuts down and again re-starts when the temperature reduces to 52°C. There is 24 x 7 uninterrupted Hot Water for the whole year, unconditional to any seasons or weather, unlike solar heaters which are completely dependent on Weather conditions.

CMB3-46PT is the perfect choice for 3-4 outlets Boosting from mains: Increases the water pressure delivered by city mains Boosting from tanks: Increases water pressure from roof tanks, break tanks and ground tanks, including rainwater tanks. Highlights: Perfect water pressure: Intelligent pump control adjusts operation automatically Easy selection: One variant for all domestic boosting needs Easy installation: Compact, all-in-one solution, plug-and-pump, installation service available by Grundfos certified installer Easy to operate: User-friendly control panel Quiet operation - Low noise operation Grundfos pump with automatic start stop system Dry running protection - Auto start when using water, auto stop when not using water 2.5 Years warranty - 2 years manufacturer warranty by Grundfos India, extra 6 months warranty if you buy from us Quality Assurance: Each CMB-PT is factory assembled and tested before delivery Long lifetime: Major pump components are manufactured from corrosion and wear resistant stainless steel. Suitable for 3-4 outlets NEW INSTALLATION: One stop centre - We prioritize our installation add-on service to our customers who also purchase Grundfos water pumps from us Guaranteed after sales service - 2.6 years warranty for Grundfos water pump Trustworthy and reliable - Installation by Grundfos water pump certified installer Piping from water tank to water pump is included Long lasting material used - By default we use PVC pipe & fittings for water pump installation, however mostly our professional installer had to adjust to client existing piping system depending on situation AND EXTRA CHARGES NEEDED BECAUSE DIFFERENT BASIC MATERIALS. Trustworthy and reliable - Installation by Grundfos water pump certified installer (Wiring) House plumbing & power point for water pump to be ready by client before installation. If client requires us to do wiring service, it can be arranged but with extra charges.

RO+HOT Water Dispenser 50-LPH-RO offers instant hot water, perfect for making beverages or preparing meals quickly. With user-friendly controls and a compact design, its ldeal for home or office use, ensuring easy access to both purified and hot water whenever needed Terms and conditions Warranty 1 year Service issues will be solved within 24 hrs (As per report) Installation – As per site condition within 24 Hours Installation Type – Standard installation free Transport Extra Delivery period – maximum 3 to 7 days(Across India), Return and refund policy – Refer website link

RO+HOT Water dispenser 25 LPH RO is designed for efficiency and convenience, delivering purified water at a capacity of 25 liters per hour. Its ideal for home or office use, ensuring easy access to both purified and hot water whenever needed. It is available with202 SS and 304 SS. Terms and conditions Warranty 1 year Service issues will be solved within 24 hrs (As per report) Installation – As per site condition within 24 Hours Installation Type – Standard installation free Transport Extra Delivery period – maximum 3 to 7 days(Across India), Return and refund policy – Refer website link