The Grundfos CMB 3-27(3-3) 0.7HP Booster Pressure Pump with 24L Tank is perfect for boosting water pressure in your home or office. This pump features a powerful 0.7HP motor and a large 24L tank, making it perfect for boosting water pressure in high-demand areas. This robust and reliable Grundfos CM 3 series booster pump is ideal for water supply and pressure boosting in domestic as well as light commercial applications. It is easy to install and operate, and has a 0.7 HP motor that delivers a powerful performance. With a head of 20-35 m and a voltage of 230 V, this booster pump is perfect for your needs. If you are looking for a booster pump that is made with high-quality stainless steel material, operates on single-phase power, and has a frequency of 50-60 Hz, then this is the pump for you!

A swimming pool heat pump is a device used to efficiently heat pool water by transferring heat from the surrounding air to the pool water. It operates on the principle of heat exchange, making it a cost-effective and environmentally friendly way to maintain a comfortable swimming temperature. How It Works: Air Intake: The heat pump draws in ambient air through a fan. Heat Absorption: The air passes over an evaporator coil containing a refrigerant. This refrigerant absorbs the heat from the air and turns into a gas. Compression: The warm gas is compressed by a compressor, increasing its temperature significantly. Heat Transfer: The hot gas passes through a heat exchanger where it transfers its heat to the pool water. Recycling: The refrigerant cools down, returns to liquid form, and the cycle repeats. Features: Energy Efficiency: Heat pumps use electricity to operate but rely on extracting heat from the air, making them more energy-efficient than traditional electric or gas heaters. Temperature Control: They typically come with thermostats for precise temperature adjustments. Durability: Designed to withstand outdoor conditions and prolonged use. Eco-Friendly: Lower carbon footprint compared to fossil fuel-based heaters. Advantages: Lower Operating Costs: Despite the initial investment, they save money in the long run due to lower energy consumption. Consistent Heating: They provide steady and reliable heating, especially in moderate climates. Longevity: Can last for 10–20 years with proper maintenance. Disadvantages: Dependent on Air Temperature: Their efficiency decreases in very cold weather since they rely on heat from the air. Slower Heating: It takes longer to heat the pool compared to gas heaters. Ideal Use: A swimming pool heat pump is best suited for regions with mild to warm climates where outdoor temperatures remain above 50°F (10°C). It's an excellent choice for residential and commercial pools, offering an economical way to extend the swimming season.

Ambient air is drawn in by the fan and passed over the evaporator. The evaporator cools the air, i.e. it extracts the heat it contains. In the evaporator, the heat removed is transferred to the working fluid (refrigerant). With the aid of an electrically driven compressor, the absorbed heat is “pumped” to a higher temperature level through an increase in pressure and given off to the heating water via the condenser (heat exchanger). In so doing, the electrical energy is used to raise the heat of the environment to a higher temperature level. Due to the fact that the heat energy extracted from the air is transferred to the heating water, this type of appliance is referred to as an air source heat pump. The air source heat pump consists of the following main components: Evaporator, fan and expansion valve as well as the low-noise compressor, the condenser and the electric control unit consisting of branded equipment for controlling and safety devices for protection of Compressor, pump etc. against any variations in voltage, current. Also consists of trip devices, if any parameters not available for smooth running of Heat Pump. The Heat Pump is connected to a Hot Water Storage Tank which is made of 4 mm M.S. Sheet, is insulated with rock wool, for maximum temperature sustenance.. Once the temperature in Tank reaches 55°C the machine automatically shuts down and again re-starts when the temperature reduces to 52°C. There is 24 x 7 uninterrupted Hot Water for the whole year, unconditional to any seasons or weather, unlike solar heaters which are completely dependent on Weather conditions.

Ambient air is drawn in by the fan and passed over the evaporator. The evaporator cools the air, i.e. it extracts the heat it contains. In the evaporator, the heat removed is transferred to the working fluid (refrigerant). With the aid of an electrically driven compressor, the absorbed heat is “pumped” to a higher temperature level through an increase in pressure and given off to the heating water via the condenser (heat exchanger). In so doing, the electrical energy is used to raise the heat of the environment to a higher temperature level. Due to the fact that the heat energy extracted from the air is transferred to the heating water, this type of appliance is referred to as an air source heat pump. The air source heat pump consists of the following main components: Evaporator, fan and expansion valve as well as the low-noise compressor, the condenser and the electric control unit consisting of branded equipment for controlling and safety devices for protection of Compressor, pump etc. against any variations in voltage, current. Also consists of trip devices, if any parameters not available for smooth running of Heat Pump. The Heat Pump is connected to a Hot Water Storage Tank which is made of 4 mm M.S. Sheet, is insulated with rock wool, for maximum temperature sustenance.. Once the temperature in Tank reaches 55°C the machine automatically shuts down and again re-starts when the temperature reduces to 52°C. There is 24 x 7 uninterrupted Hot Water for the whole year, unconditional to any seasons or weather, unlike solar heaters which are completely dependent on Weather conditions.

Ambient air is drawn in by the fan and passed over the evaporator. The evaporator cools the air, i.e. it extracts the heat it contains. In the evaporator, the heat removed is transferred to the working fluid (refrigerant). With the aid of an electrically driven compressor, the absorbed heat is “pumped” to a higher temperature level through an increase in pressure and given off to the heating water via the condenser (heat exchanger). In so doing, the electrical energy is used to raise the heat of the environment to a higher temperature level. Due to the fact that the heat energy extracted from the air is transferred to the heating water, this type of appliance is referred to as an air source heat pump. The air source heat pump consists of the following main components: Evaporator, fan and expansion valve as well as the low-noise compressor, the condenser and the electric control unit consisting of branded equipment for controlling and safety devices for protection of Compressor, pump etc. against any variations in voltage, current. Also consists of trip devices, if any parameters not available for smooth running of Heat Pump. The Heat Pump is connected to a Hot Water Storage Tank which is made of 4 mm M.S. Sheet, is insulated with rock wool, for maximum temperature sustenance.. Once the temperature in Tank reaches 55°C the machine automatically shuts down and again re-starts when the temperature reduces to 52°C. There is 24 x 7 uninterrupted Hot Water for the whole year, unconditional to any seasons or weather, unlike solar heaters which are completely dependent on Weather conditions.

Ambient air is drawn in by the fan and passed over the evaporator. The evaporator cools the air, i.e. it extracts the heat it contains. In the evaporator, the heat removed is transferred to the working fluid (refrigerant). With the aid of an electrically driven compressor, the absorbed heat is “pumped” to a higher temperature level through an increase in pressure and given off to the heating water via the condenser (heat exchanger). In so doing, the electrical energy is used to raise the heat of the environment to a higher temperature level. Due to the fact that the heat energy extracted from the air is transferred to the heating water, this type of appliance is referred to as an air source heat pump. The air source heat pump consists of the following main components: Evaporator, fan and expansion valve as well as the low-noise compressor, the condenser and the electric control unit consisting of branded equipment for controlling and safety devices for protection of Compressor, pump etc. against any variations in voltage, current. Also consists of trip devices, if any parameters not available for smooth running of Heat Pump. The Heat Pump is connected to a Hot Water Storage Tank which is made of 4 mm M.S. Sheet, is insulated with rock wool, for maximum temperature sustenance.. Once the temperature in Tank reaches 55°C the machine automatically shuts down and again re-starts when the temperature reduces to 52°C. There is 24 x 7 uninterrupted Hot Water for the whole year, unconditional to any seasons or weather, unlike solar heaters which are completely dependent on Weather conditions.

Ambient air is drawn in by the fan and passed over the evaporator. The evaporator cools the air, i.e. it extracts the heat it contains. In the evaporator, the heat removed is transferred to the working fluid (refrigerant). With the aid of an electrically driven compressor, the absorbed heat is “pumped” to a higher temperature level through an increase in pressure and given off to the heating water via the condenser (heat exchanger). In so doing, the electrical energy is used to raise the heat of the environment to a higher temperature level. Due to the fact that the heat energy extracted from the air is transferred to the heating water, this type of appliance is referred to as an air source heat pump. The air source heat pump consists of the following main components: Evaporator, fan and expansion valve as well as the low-noise compressor, the condenser and the electric control unit consisting of branded equipment for controlling and safety devices for protection of Compressor, pump etc. against any variations in voltage, current. Also consists of trip devices, if any parameters not available for smooth running of Heat Pump. The Heat Pump is connected to a Hot Water Storage Tank which is made of 4 mm M.S. Sheet, is insulated with rock wool, for maximum temperature sustenance.. Once the temperature in Tank reaches 55°C the machine automatically shuts down and again re-starts when the temperature reduces to 52°C. There is 24 x 7 uninterrupted Hot Water for the whole year, unconditional to any seasons or weather, unlike solar heaters which are completely dependent on Weather conditions.

Ambient air is drawn in by the fan and passed over the evaporator. The evaporator cools the air, i.e. it extracts the heat it contains. In the evaporator, the heat removed is transferred to the working fluid (refrigerant). With the aid of an electrically driven compressor, the absorbed heat is “pumped” to a higher temperature level through an increase in pressure and given off to the heating water via the condenser (heat exchanger). In so doing, the electrical energy is used to raise the heat of the environment to a higher temperature level. Due to the fact that the heat energy extracted from the air is transferred to the heating water, this type of appliance is referred to as an air source heat pump. The air source heat pump consists of the following main components: Evaporator, fan and expansion valve as well as the low-noise compressor, the condenser and the electric control unit consisting of branded equipment for controlling and safety devices for protection of Compressor, pump etc. against any variations in voltage, current. Also consists of trip devices, if any parameters not available for smooth running of Heat Pump. The Heat Pump is connected to a Hot Water Storage Tank which is made of 4 mm M.S. Sheet, is insulated with rock wool, for maximum temperature sustenance.. Once the temperature in Tank reaches 55°C the machine automatically shuts down and again re-starts when the temperature reduces to 52°C. There is 24 x 7 uninterrupted Hot Water for the whole year, unconditional to any seasons or weather, unlike solar heaters which are completely dependent on Weather conditions.

The Booster Pump System is a robust and efficient solution designed to enhance water pressure and flow in residential, commercial, and industrial applications. Engineered for reliability and performance, this system is ideal for ensuring consistent water supply in areas with low or fluctuating pressure. Key Features: High Performance: Equipped with a powerful motor and advanced impeller design, the booster pump delivers optimal pressure and flow rates, meeting the demands of various water delivery systems. Durability: Constructed with corrosion-resistant materials such as stainless steel and cast iron, ensuring a long service life even in challenging environments. Energy Efficiency: Features advanced energy-saving technology, reducing power consumption without compromising performance. User-Friendly Design: Compact and easy to install, the system includes intuitive controls and a digital interface for monitoring pressure and flow settings. Quiet Operation: Operates with minimal noise, making it suitable for indoor and residential use. Versatility: Compatible with municipal water supplies, wells, rainwater tanks, and irrigation systems. Applications: Residential water supply for homes and apartments Commercial buildings such as hotels, schools, and offices Industrial processes requiring consistent water pressure Agricultural irrigation systems Specifications: Flow Rate: Up to [XXX] gallons per minute Maximum Pressure: [XXX] PSI Voltage: Available in 110V/220V options Material: Stainless steel/cast iron housing Warranty: [XXX]-year limited warranty The Booster Pump System is the perfect choice for anyone looking to upgrade their water delivery system with a reliable, high-performance solution. Whether you need consistent pressure for your home or a dependable supply for commercial or industrial applications, this system offers unmatched quality and efficiency.